Parts & Accessories

Parts & Accessories

Every 3D printing set up can greatly benefit from the products listed on this page. We use all of these products in our own shop when making filament, printing, or finishing our completed prints. This is also were you can find replacement parts for your Filabot extruder systems as well as parts for the 3-D Printers we offer.

$32.12
Click here to read our review of this product.  XTC-3D® is a protective coating...
Click here to read our review of this product.  XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.Inexpensive to Use: 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D® fills in 3D print striations and...
$4.75
Removing parts for any 3D printer bed can be a real pain. We...
Removing parts for any 3D printer bed can be a real pain. We found that this tool is the best thing to use to remove stuck on parts. The tools tip is made from thin metal that works its way under the part, once under the part the back of the metal tool is thicker and it helps to pop the part off.  A must have tool for any 3D printer user Quickly remove parts without damaging print bed or parts Long reach **Please use caution when using this tool, parts can pop off quickly allowing for this tool to...
From $5.61
Our ABS Smoothing Pens work great for using acetone to smooth out the layers...
Our ABS Smoothing Pens work great for using acetone to smooth out the layers on ABS 3D printed objects. The small pen has an 8mm wide tip for fitting into tighter areas. The medium pen has a 15mm wide tip. The large pen has a 30mm wide tip for detailing broad surfaces.  The smoothing pen works by breaking down the outer layer of the plastic and makes the layer definition much less noticeable.  Simply fill the pen with acetone press the tip down on the part and rub the pen tip everywhere that smoother surfaces are desired. The picture below shows...
$15.00
These reusable pellet containers are perfect for keeping your polymer inventory dry and organized....
These reusable pellet containers are perfect for keeping your polymer inventory dry and organized. We designed the included 3D printed desiccant cage that sits securely in the throat of the jug. Jugs are stackable and made of durable HDPE. Each 2.5 gallon jug comes with a reusable label, desiccant cage, and 10 pouches of desiccant. Holds 15-20 lbs of pellets.     
$63.21
Caution should always be used when 3D printing within a poorly ventilated indoor...
Caution should always be used when 3D printing within a poorly ventilated indoor environment.  This is why we created the Filafilter. Filafilter is a carbon air filter for your 3D printer or filament extruder.  It uses a fan to circulate the air around your device and filter any harmful fumes they may be released into the indoor air.  As the air passes through the fan, it’s filtered by two carbon pads that capture any harmful particles before they get released into the air, keeping yourself and anyone around you out of harm’s way. To read more about the potential harm...
$699.00
Ships in 5 weeks The Filabot Spooler is the ultimate complement to our...
Ships in 5 weeks The Filabot Spooler is the ultimate complement to our extruder systems. In addition to conveniently spooling your extruded filament, this unit allows you to easily fine tune the extrusion diameter for the tightest possible tolerances. This is achieved through adjusting the speed of the puller wheels which draw the filament from the extruder. The puller wheels have been engineered to be non-compressive which preserves the quality of the extrusion. This updated model features a variable traverse mechanism to evenly distribute filament onto the spool, an upgraded circuit board for the smoothest possible power delivery, and stainless roller shafts that...
$4.12
Need a place to store you extruded filament? We have just the thing....
Need a place to store you extruded filament? We have just the thing. These spools are made from recycled ABS plastic. They are the spools we use in house producing filament.  These spools can hold a little over one pound of ABS or PLA filament. *Spools ship empty*
From $12.14
THIS PART ONLY WORKS ON THE CURRENT STYLE SYSTEMS. 3/30/16 Forward These nozzles are to...
THIS PART ONLY WORKS ON THE CURRENT STYLE SYSTEMS. 3/30/16 Forward These nozzles are to make 1.75mm or 3mm, ABS, PLA or other types of filament. We also provide a pre-drilled nozzle for users who are looking to make custom size extruder nozzles. Pre-drilled nozzles have a 1mm hole. Please note that the nozzle size will be different size than the filament that is being made. It is best to pull down the filament to the correct size.
$47.00
THIS PART ONLY WORKS ON THE PREVIOUS STYLE SYSTEMS WITH THE PREVIOUS STYLE LARGE NOZZLE...
THIS PART ONLY WORKS ON THE PREVIOUS STYLE SYSTEMS WITH THE PREVIOUS STYLE LARGE NOZZLE Different size nozzles are a must when extruding different types of plastic. This nozzle pack is broken into a 1.75mm or 2.85mm packs. Each pack consists of 6 sizing nozzles, 2 below size and 2 above size, and one un-drilled nozzle. Nozzle packs come in a case for easy storage.  In the 1.75mm pack these is the nozzle sizes: 1.65mm, 1.70mm, 1.75mm, 1.80mm, 1.85mm, and Un-drilled In the 2.85mm pack these is nozzle sizes:  2.75mm, 2.80mm, 2.85mm, 2.90mm, 2.95mm, and Un-drilled    
From $3.20
THIS PART ONLY WORKS ON THE PREVIOUS STYLE SYSTEMS WITH THE PREVIOUS STYLE LARGE NOZZLE...
THIS PART ONLY WORKS ON THE PREVIOUS STYLE SYSTEMS WITH THE PREVIOUS STYLE LARGE NOZZLE These nozzles are to make 1.75mm or 3mm, ABS, PLA or other types of filament. We also provide an undrilled nozzle for users who are looking to make custom size extruder nozzles.    Note: All Filabot Extruders systems come with both of these nozzles. 
$26.00
This nozzle holds the sizing bolt nozzles. This part only works on the...
This nozzle holds the sizing bolt nozzles. This part only works on the previous style extruder systems.
From $180.00
Filabot provides a testing service in a few different levels. More detailed descriptions...
Filabot provides a testing service in a few different levels. More detailed descriptions are outlined below. Cost is for one polymer to be tested. Regardless of a pass or fail, testing services are not refundable.  Pellet Extruding Test - $180.00 We test pellets provided from the customer to see if the plastic can be extruding using our Filabot Wee or Filabot Original extruder systems. We will provide documentation on the proper temperatures and set up procedures. Minimum of 1lb of material needed for testing, also a MSDS on the material is needed. Customer mails the sample to our testing lab after...
$5.20
These carbon filters are replacements for our Filafilter. The purchase is for one...
These carbon filters are replacements for our Filafilter. The purchase is for one filter.     
$30.21
This new coating offers a professional quality coating finish for any type of...
This new coating offers a professional quality coating finish for any type of 3D printed part. This coating is simpler to use compared to other coatings as it has a one to one mixtures ratio, and a application specific properties to ensure that no bubbles are induced when coating objects. Use this product to protect your 3D prints, make them stronger, and to save time on finishing. Item has 16oz of coating epoxy for coating many parts.  What's in the box: 8oz Part A 8oz Part B 3 Foam Brushes 3 Mixing Cups 3 Mixing Sticks Instructions Additional Information: PC9903 Datasheet PC9903A...

1 – 14 products of 14