Replacement grommets for the Filabot Spooler traverse assembly.
The package contains two (2) grommets
How to replace grommets
1. Unplug the Spooler
2. Remove the front block of the traverse by loosening the set screw
3. Pull off the old grommet
4. Twist the threaded rod by hand to remove the filament guide
5. Pull off the old grommet
6. Install one new grommet
7. Twist the threaded rob by hand to reinstall the filament guide
8. Install one new grommet
9. Install the front block and tighten the set screw
Reviews here