Filabot

$4.75
Removing parts for any 3D printer bed can be a real pain. We...
Removing parts for any 3D printer bed can be a real pain. We found that this tool is the best thing to use to remove stuck on parts. The tools tip is made from thin metal that works its way under the part, once under the part the back of the metal tool is thicker and it helps to pop the part off.  A must have tool for any 3D printer user Quickly remove parts without damaging print bed or parts Long reach **Please use caution when using this tool, parts can pop off quickly allowing for this tool to...
$2.75
Add some color to your plain white ABS plastic by using our awesome...
Add some color to your plain white ABS plastic by using our awesome ABS colorants. This colorant comes in packets that are roughly 25 grams each.  We recommend using a 4% colorant weight to base ABS plastic weight, this gives good color throughout. When using this colorant, we recommend using a base plastic that is white or natural color to get the best result.  The color chip pictured next to the pellets reflects the actual extruded and printed color. Color Options: Blue, Yellow, Red, Green, Orange, Purple, White, Black Weight: 25 grams
From $7.65
ABS is an engineering grade polymer. This ABS grade was selected because it...
ABS is an engineering grade polymer. This ABS grade was selected because it exhibits great extrusion output speed, and ease of extrusion. For 3D printing this ABS provides great layer adhesion. This ABS exhibits high tensile strength and excellent impact resistance. ABS pellets can be combined with additives to produce filament with custom colors and technical properties.  Specifications: Plastic Type: ABS Print Temperature: 210°C - 230 °C Extrude Temperature: 150°C - 190 °C Color: White Material Safety Datasheet: ABS
From $5.61
Our ABS Smoothing Pens work great for using acetone to smooth out the layers...
Our ABS Smoothing Pens work great for using acetone to smooth out the layers on ABS 3D printed objects. The small pen has an 8mm wide tip for fitting into tighter areas. The medium pen has a 15mm wide tip. The large pen has a 30mm wide tip for detailing broad surfaces.  The smoothing pen works by breaking down the outer layer of the plastic and makes the layer definition much less noticeable.  Simply fill the pen with acetone press the tip down on the part and rub the pen tip everywhere that smoother surfaces are desired. The picture below shows...
$5.26
Keeping your additives and colorants dry is just as important as keeping your...
Keeping your additives and colorants dry is just as important as keeping your base resins dry. These containers are great for storing colorants or other additives. Each bottles comes with a label that can be used to identify the contents.    ** Picture is of old style bottles, new photo coming soon**
$7.96
Filabot's Bargain Bin is used to sell spools of filament that don't make...
Filabot's Bargain Bin is used to sell spools of filament that don't make weight requirements for full spools, or just did not meet our expectations. Spools could have loose winds and/or not quite the right color.
From $24.20
We have updated this filament to have an even larger variance in color....
We have updated this filament to have an even larger variance in color. We mixed a bunch of our colorants together and extruded it just to see what would happen. The results were so cool, we decided to offer it up as a product after! The filament is the same quality as all of our other filaments with +/-0.05mm diameter and roundness tolerance.   Specifications: Diameter: 1.75mm or 2.85mm Diameter Tolerance: +/-0.05mm Print Temp: 220-240°C Colors: Random, changes throughout the whole spool.  Weight: 1lb Packaging: Spooled and vacuum sealed  Check out this time-lapse of us making Color-full filament! 
From $114.14
With 16 MILLION colors, we now have the color that you need, as...
With 16 MILLION colors, we now have the color that you need, as well as more colors than anyone, ever. No longer are you stuck with using filaments that are standard colors, or colors that are just "close enough". Pick the best colors that will match your school or company colors. All of our filament is laser measured to be within a +/-0.05mm tolerance or your money back! All filament is made to order with a 3 week lead time Laser measured, +/- 0.05mm tolerance RGB color code system 16 Million Colors
From $17.36
Our Extruder Purge Compound is to be used when cleaning your extruder out. ...
Our Extruder Purge Compound is to be used when cleaning your extruder out.  Whether it just needs a good cleaning or before switching the plastic type you are extruding. Simply warm up your extruder, remove the small bolt nozzle from the end of the extruder, and fill the hopper about half way with this compound. Let the hopper empty, then remove the large nozzle and use needle nose pliers to pull the left over cleaning plastic out.   **Do not use with a mesh melt filter installed on previous models** Specifications:  1lb Bag Temperature Ratings: Low Temperature - Max temperature 329°C High...
From $12.14
THIS PART ONLY WORKS ON THE CURRENT STYLE SYSTEMS. 3/30/16 Forward These nozzles are to...
THIS PART ONLY WORKS ON THE CURRENT STYLE SYSTEMS. 3/30/16 Forward These nozzles are to make 1.75mm or 3mm, ABS, PLA or other types of filament. We also provide a pre-drilled nozzle for users who are looking to make custom size extruder nozzles. Pre-drilled nozzles have a 1mm hole. Please note that the nozzle size will be different size than the filament that is being made. It is best to pull down the filament to the correct size.
$0.00
Launch Pending The Filabot Airpath is a device that uses forced convection to...
Launch Pending The Filabot Airpath is a device that uses forced convection to cool filament as it is being extruded. The Filabot Spooler can also be used for the common ABS and PLA materials to help get greater tolerance and easier extrusion setup. The air path is a must of researches and development labs who are working with higher temperature polymers where the filament needs to be cooled before it is passed through the Filabot Spooler. This system has a air speed readout so that any range of air flow can been set.  Specifications: Voltage: 110VAC or 220VAC input Noise Level:...
$2,499.00
The Filabot EX2 system is our most advanced filament extruder. The EX2 features...
The Filabot EX2 system is our most advanced filament extruder. The EX2 features a three-stage extrusion screw made from hardened and polished high-carbon steel. This proprietary, patent-pending screw is designed to pressurize plastics during the extrusion process, assisting in diameter control and boosting the overall output. The mixing capability of the screw is enhanced by the utilization of a progressive compression section, which applies shear force between the polymer and the barrel wall. The EX2 also features extrusion speed control, which is exclusive to this model. The speed control board includes an automatic, variable voltage control module that is engineered...
From $15.00
THIS PART ONLY WORKS ON THE PREVIOUS STYLE SYSTEMS WITH THE PREVIOUS STYLE...
THIS PART ONLY WORKS ON THE PREVIOUS STYLE SYSTEMS WITH THE PREVIOUS STYLE LARGE NOZZLE These nozzles are to make 1.75mm or 3mm, ABS, PLA or other types of filament. We also provide an undrilled nozzle for users who are looking to make custom size extruder nozzles. Note: All Filabot Extruders systems come with both of these nozzles.
$6,200.00
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic...
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic processing unit that granulates plastics down to a particle size that the Filabot can extrude. This unit stands 51" tall and has a 13.5" X 6.3" feed throat. It is powerful enough to effortlessly recycle failed 3D prints at 100% infill as well as other plastic material, allowing your organization to recover these resources for conversion into 3D filament. The unit processes material at a rate of up to 170 lbs/hr and operates at a low RPM, preventing thermal degradation of the regrind. Full technical support from Filabot is available.  Features Recycle...
$1,399.00
The Filabot Original is designed and engineered to bring industrial filament production quality...
The Filabot Original is designed and engineered to bring industrial filament production quality right to your desktop. In fact, you’ll enjoy savings of up to 90% over commercially purchased filament when you produce your own filament using inexpensive, raw plastic pellets. Save even more by turning failed prints and household waste plastics into filament. Create your own custom filaments with unlimited physical properties. Built, inspected, and tested by our technicians at our Vermont facility in the United States. **Voltage Note – be sure to select the 110VAC (Domestic) or 220VAC (International) specific to the country that you are going to...

1 – 15 products of 67