Extruder

$0.00
Launch Pending The Filabot Airpath is a device that uses forced convection to...
Launch Pending The Filabot Airpath is a device that uses forced convection to cool filament as it is being extruded. The Filabot Spooler can also be used for the common ABS and PLA materials to help get greater tolerance and easier extrusion setup. The air path is a must of researches and development labs who are working with higher temperature polymers where the filament needs to be cooled before it is passed through the Filabot Spooler. This system has a air speed readout so that any range of air flow can been set.  Specifications: Voltage: 110VAC or 220VAC input Noise Level:...
$2,499.00
The Filabot EX2 system is our most advanced filament extruder. The EX2 features...
The Filabot EX2 system is our most advanced filament extruder. The EX2 features a three-stage extrusion screw made from hardened and polished high-carbon steel. This proprietary, patent-pending screw is designed to pressurize plastics during the extrusion process, assisting in diameter control and boosting the overall output. The mixing capability of the screw is enhanced by the utilization of a progressive compression section, which applies shear force between the polymer and the barrel wall. The EX2 also features extrusion speed control, which is exclusive to this model. The speed control board includes an automatic, variable voltage control module that is engineered...
$6,200.00
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic...
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic processing unit that granulates plastics down to a particle size that the Filabot can extrude. This unit stands 51" tall and has a 13.5" X 6.3" feed throat. It is powerful enough to effortlessly recycle failed 3D prints at 100% infill as well as other plastic material, allowing your organization to recover these resources for conversion into 3D filament. The unit processes material at a rate of up to 170 lbs/hr and operates at a low RPM, preventing thermal degradation of the regrind. Full technical support from Filabot is available.  Features Recycle...
$1,399.00
The Filabot Original is designed and engineered to bring industrial filament production quality...
The Filabot Original is designed and engineered to bring industrial filament production quality right to your desktop. In fact, you’ll enjoy savings of up to 90% over commercially purchased filament when you produce your own filament using inexpensive, raw plastic pellets. Save even more by turning failed prints and household waste plastics into filament. Create your own custom filaments with unlimited physical properties. Built, inspected, and tested by our technicians at our Vermont facility in the United States. **Voltage Note – be sure to select the 110VAC (Domestic) or 220VAC (International) specific to the country that you are going to...
$0.00
In Prototype Phase The Filabot Reclaimer is a desktop granulation device that allows...
In Prototype Phase The Filabot Reclaimer is a desktop granulation device that allows users to grind up failed prints and other waste plastics for re-extrusion in our Filabot Extruders. 
$0.00
Discontinued - No Longer Selling   Perfect for any maker space, fab lab,...
Discontinued - No Longer Selling   Perfect for any maker space, fab lab, or DIY studio. The Filabot Wee turns plastic pellets into 3d printable filament. Capable of extruding ABS or PLA, the Filabot Wee extruder quickly pays for itself with the cost savings from filament purchased online. The Filabot Wee can make both 1.75mm and 3mm diameter filament at a very fast rate of up to 40 ipm depending on the type of plastic. In the time it take to design your part, you can already have enough filament to print it. The Filabot Wee Kit does not come assembled. **Voltage...
$3,250.00
4 Week Lead Time - Build to Order Our filament tester is used...
4 Week Lead Time - Build to Order Our filament tester is used to check the consistency of extruded filament. Simple place a spool of filament on side then feed through the drive system to the empty spool on the opposite side. As the filament comes off the spool is passes through a laser system that measures the diameter and records to our custom software. You will visually be able to see the diameter of every section of filament and know with confidence if the filament is good for printing with.  Features High Accuracy Laser Touch Screen Graph Traverse System...

1 – 7 products of 7