Shop Blog – Tagged "Material Extrusion Report" – Filabot

Material Extrusion Report RSS

EX6, Experiments, Filabot Spooler, Filameasure, Material Extrusion Report, PLA -

Here is one for all you additive addicts out there! Wood and plastic are often placed conceptually as antithetical materials...

Read more

EX6, Experiments, extruders, Filameasure, Filament, Material Extrusion Report, melt filter nozzles, PLA -

We care about the materials we sell and the success of using our machines. This report was done with very...

Read more

EX2, Experiments, extruders, Material Extrusion Report, PLA -

We care about the materials we sell and the success of using our machines. This report was done with very...

Read more

EX2, Experiments, extruders, Material Extrusion Report, melt filter nozzles, Pellets, PLA -

Virgin 3D870 Polylactic Acid (PLA 3D870) was extruded in the EX2 to compare the tolerances of the polymer with different Filabot Accessories. From testing, we saw that the tolerances of the material improved when using the Melt Filter Nozzles. The best outcome we had when conducting the tests were seen when we used the Standard Melt Filter.

Read more

EX6, Experiments, extruders, Material Extrusion Report, melt filter nozzles, nozzle, Pellets, rPETG -

rPETG was extruded in the EX6 to compare the tolerances of the polymer with different Filabot Accessories. From testing, we saw that the tolerances of the material improved when using the Chrome Screw Addition over the Standard Stock EX6 Screw. We also noticed tighter tolerance when using the Melt Filter Nozzles.

Read more