Blog

Virgin 3D870 Polylactic Acid (PLA 3D870) was extruded in the EX2 to compare the tolerances of the polymer with different Filabot Accessories. From testing, we saw that the tolerances of the materia...

rPETG was extruded in the EX6 to compare the tolerances of the polymer with different Filabot Accessories. From testing, we saw that the tolerances of the material improved when using the Chrome Sc...

As 3D printers get larger, filament is not a viable option for fabrication as the output is too slow. The next solution is a direct print pellet head extruder. Using pellets to directly print objec...

The "extra length" of an Extended Melt Filter Nozzle improves output consistency, keeping your filament extrusion to the appropriate range. Use the Filabot Melt Filter Nozzle to help decontaminate ...

We have been taking some time to craft a new mission statement. We are ready to share it with you and would love your feedback. Also, we updated our company values. The new company values are below...

Additions to the 1.75mm sheets with HIPS and PETG+ added for setting.  For the first time a complete list of 2.85mm diameter settings for all of the current grades we have on the site as well as so...

Close the Loop - Reuse, Rework, Re-extrude Finally, the perfect way to measure filament while extruding. The Filabot Filameasure is the perfect addition to the Filabot Spooler, this addition m...

As many of you may have seen, there has been a huge effort from the 3D printing community to supply medical equipment in the fight against Covid-19. We want to bring your attention to these two pro...

These 3D printed parts developed by a group of doctors at the University of Texas Health Science Center at San Antonio are currently being used to help save lives in NYC and they may very well be n...