EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 and MDPE10 Extruder Screws
EX6 and MDPE10 Extruder Screws

Filabot

EX6 and MDPE10 Extruder Screws

Sale price€2.082,95
Screw Design:Standard Screw - Mixer Element
Quantity:

25% OFF - End of Year Sale
Use code FILABOT25 to save 25% at checkout

Contact Us

Filabot 3D Printer Recycling Filament Firm Logo Contact
Email: contact@filabot.com

Due to increased support volume, we have switched all our customer support inquiries to an email ticket system. This will increase our support window and provide you with faster support. If you would like a callback, please email us your phone number so we can assist you. 

Our standard response time is 24 to 48 hours on a typical business day.

Shipping Department Hours:

7:00 AM - 5:00 PM
Monday - Friday

Address:

Filabot HQ
81 Parker Road 
Barre VT, 05641

www.filabot.com
www.massivedimension.com


Other Resources

Help Center

Extrusion Hardware

Tested Plastics - What plastics work, what do not

Videos

Our screws are designed and tested by our engineers to meet a variety of customer needs. These screws for in the Filabot EX6 filament extruder and in the MDPE10 direct printing extruder.

Standard Screw - Mixer Element (EX6-625-ME): Our stock general purpose screw profile with an additional mixer element for mixing and compounding extrusion applications. Works well for mixing additives, fillers, and co-polymer formulations. 

Standard Screw - Mixer Element High Filled Polymer (EX6-625-MEHF): Our stock general purpose screw profile with an additional mixer element for mixing and compounding extrusion applications. Works well for mixing additives, fillers, and co-polymer formulations where polymer has a high fill rate of carbon fiber, glass fiber, or other additives.

Standard Screw (EX6-625): Our standard screw is designed for most PLA and ABS grades typically used for 3D printing, as well as other polymers with a similar melt viscosity. Our standard screw works best with pellets and granules in the 2-5mm size range.

Standard Higher Shear (EX6-120-C2): This screw is the same spec as our Standard Screw, only shallower (high shear). This design can improve performance when using powders and smaller pellets (3mm and under).

High Compression Screw (EX6-120-C3): Best for pellets/granules in the 3mm and under range. This screw offers a higher compression than our Standard Screw.

Low Compression Screw (EX6-145-C125): This screw can improve performance with higher melt viscosity polymers which require less compression. Pellets and granules in the 2-4mm size range work best with this screw.

No Compression Screw (EX6-145-C0): This screw can improve performance with higher melt viscosity polymers that require no compression. Pellets and granules in the 2-4mm size range work best with this screw.

Full Screw Bundle (Qty 5) - Unplated: This bundle includes the 5 EX6 (except the chrome screw) screws at a discount price. These screws are not plated with chrome.


No Videos Currently