EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot

Filabot

EX6 and MDPE10 Extruder Screws

Sale price$1,658.00 AUD
Screw Design:Standard Screw
Quantity:

Our screws are designed and tested by our engineers to meet a variety of customer needs. These screws for in the Filabot EX6 filament extruder and in the MDPE10 direct printing extruder.

Standard Screw (EX6-625): Our standard screw is designed for most PLA and ABS grades typically used for 3D printing, as well as other polymers with a similar melt viscosity. Our standard screw works best with pellets and granules in the 2-5mm size range.

Standard Screw - Chrome Plated (EX6-625CHR): EX6 standard extrusion screw, upgraded with chrome plating. This new feature provides a slippery surface compared to stock screw this allows for an easy glide of materials. This screw is preferred for tight tolerance extrusion.

Standard Higher Shear (EX6-120-C2): This screw is the same spec as our Standard Screw, only shallower (high shear). This design can improve performance when using powders and smaller pellets (3mm and under).

Standard Higher Shear Screw - Chrome Plated (EX6-120-C2-CHR): Upgraded with chrome plating. This new feature provides a slippery surface compared to stock screws this allows for an easy glide of materials.

High Compression Screw (EX6-120-C3): Best for pellets/granules in the 3mm and under range. This screw offers a higher compression than our Standard Screw.

Low Compression Screw (EX6-145-C125): This screw can improve performance with higher melt viscosity polymers which require less compression. Pellets and granules in the 2-4mm size range work best with this screw.

Low Compression Screw - Chrome Plated (EX6-145-C125-CHR): Upgraded with chrome plating. This new feature provides a slippery surface compared to stock screws this allows for an easy glide of materials.

No Compression Screw (EX6-145-C0): This screw can improve performance with higher melt viscosity polymers that require no compression. Pellets and granules in the 2-4mm size range work best with this screw.

No Compression Screw - Chrome Plated (EX6-145-C0-CHR): Upgraded with chrome plating. This new feature provides a slippery surface compared to stock screws this allows for an easy glide of materials.

Full Screw Bundle (Qty 5) - Unplated: This bundle includes the 5 EX6 (except the chrome screw) screws at a discount price. These screws are not plated with chrome.


No Videos Currently