Shop Blog – Tagged "Filament" – Filabot

Filament RSS

3d recycling, 3d Recyling, 3D Waste, EX2, EX6, extruders, Filabot Spooler, Filameasure, Filament -

The Basics of Extrusion

The Basics of Extrusion

If you are a recent recipient of a Filabot extrusion system, you might feel a bit unsure of what each...

Read more

3-D Printing, 3d recycling, 3d Recyling, Experiments, Filament, MDPH2, PLA -

Printing with Coffee Part II

Printing with Coffee Part II

After diving into the research on compounding PLA with spent coffee grounds accomplished at Washington State and assisted by our...

Read more

3d recycling, 3d Recyling, Experiments, Filament, Recycling Filament, University of Utah binary Collab -

University of Utah Update: Chair Prints with Recycled PETG Filament Part 2

University of Utah Update: Chair Prints with Recycled PETG Filament Part 2

For the final project with the Design of University of Utah Digital Assemblies  class, students were tasked with a chair design...

Read more

3d recycling, 3d Recyling, Experiments, Filament, Recycling Filament, University of Utah binary Collab -

University of Utah Update: Chair Prints with Recycled PETG Filament

University of Utah Update: Chair Prints with Recycled PETG Filament

For the final project with the Design of University of Utah Digital Assemblies class, students were tasked with a chair design that...

Read more

3d Recyling, EX2, Experiments, Filament, Recycling Filament, University of Utah binary Collab -

University of Utah Update: Chair Experiments with Recycled PETG Filament

University of Utah Update: Chair Experiments with Recycled PETG Filament

IMPORTANT NOTE: We're back to posting the University of Utah/ binary collaboration posts on Filabot after several weeks on Massive...

Read more

EX6, Experiments, extruders, Filameasure, Filament, Material Extrusion Report, melt filter nozzles, PLA -

NEW PRODUCT: PLA LX175 EX6 Tolerances Compared: Material Extrusion Report

NEW PRODUCT: PLA LX175 EX6 Tolerances Compared: Material Extrusion Report

We care about the materials we sell and the success of using our machines. This report was done with very...

Read more

3-D Printer, 3-D Printing, EX2, Experiments, extruders, Filabot, Filament, massive dimension, MDPH2, Pelletizer, rPETG, University of Utah binary Collab -

University of Utah Update: Testing - Large Format Prints

University of Utah Update: Testing - Large Format Prints

IMPORTANT NOTE: Going forward the posts related to our collaboration with binary and the University of Utah will be posted...

Read more

3-D Printer, 3-D Printing, 3d recycling, 3D Waste, EX2, Experiments, Filabot, Filament, Print, Recycling Filament, Renewable, rPETG, Science, Spooling, University of Utah binary Collab -

University of Utah Update: Prototyping - Test Prints (Desktop)

University of Utah Update: Prototyping - Test Prints (Desktop)

Building off their form explorations, using prompts such as Aleatory Methods, Protest as Form, and For Loops, activity for the...

Read more

3d recycling, 3d waste, EX2, Experiments, Filament, recycling, Recycling Filament, Renewable, rPETG, Science, University of Utah binary Collab -

University of Utah Update: Form Exploration - Aleatory Methods

University of Utah Update: Form Exploration - Aleatory Methods
Students were grouped and tasked with exploring form using 1-2 of the following design prompts: Material Arcs, Protest as Form, Tactile Communication, Fascination, For Loops, and Aleatory Methods.

Read more

3d Recyling, 3D Waste, EX2, Experiments, Filabot, Filament, recycling, Recycling Filament, Renewable, rPETG, Science, University of Utah binary Collab -

University of Utah Update: Material experimentation (additives)

University of Utah Update: Material experimentation (additives)
MDD Digital Assemblies students were asked to select a material additive by following one of three design prompts: color study, sound/acoustic study, and scent study.

Read more

3d Recyling, 3D Waste, EX2, Experiments, Filabot, Filament, recycling, rPETG, University of Utah binary Collab -

University of Utah Update: Pre-Experimentation Experimentation

University of Utah Update: Pre-Experimentation Experimentation
To prompt the MDD Digital Assemblies students - and satiate some of our own curiosities - professor Milad Mozari and Matt Sutton of binary initiated some experiments using powdered additives spanning the basic material categories: timber, glass, metal.

Read more

3-D Printing, EDF, Filabot, Filament, Science, Spooling -

UPDATE: Extrusion Data File System - Updated June 2020

UPDATE: Extrusion Data File System - Updated June 2020
Additions to the 1.75mm sheets with HIPS and PETG+ added for setting.  For the first time a complete list of 2.85mm diameter settings for all of the current grades we have on the site as well as some old grades: HIPS, Jam ABS, and PETG+

Read more

Tags