Special Offer for All Educational Facilities!

Get 10% OFF!

We're offering a 10% discount to all educational facilities.

 Companies that use Filabot

From $16.87
ABS is an engineering grade polymer. This ABS grade was selected because it...
ABS is an engineering grade polymer. This ABS grade was selected because it exhibits great extrusion output speed, and ease of extrusion. For 3D printing this ABS provides great layer adhesion. This ABS exhibits high tensile strength and excellent impact resistance. ABS pellets can be combined with additives to produce filament with custom colors and technical properties.  Specifications: Plastic Type: ABS Print Temperature: 210°C - 230 °C Extrude Temperature: 150°C - 190 °C Color: White Material Safety Datasheet: ABS
From $13.07
PLA (Polylactic Acid) is an excellent choice for 3D printing. PLA is non-toxic...
PLA (Polylactic Acid) is an excellent choice for 3D printing. PLA is non-toxic and produced from renewable sources. It is also remarkably easy to print with PLA, as it does not require a heated bed and exhibits minimal warpage. PLA pellets can be combined with additives to produce filament with custom colors and technical properties. Our PLA is produced here in the US from Natureworks, the global leader in bio-based material development.  Specifications: Plastic Type: PLA Extrude Temperature: 180°C - 200 °C Color: White Pellet Grade: 4043D Material Safety Datasheet: PLA 4043D
$1,399.00
The Filabot Original is designed and engineered to bring industrial filament production quality...
The Filabot Original is designed and engineered to bring industrial filament production quality right to your desktop. In fact, you’ll enjoy savings of up to 90% over commercially purchased filament when you produce your own filament using inexpensive, raw plastic pellets. Save even more by turning failed prints and household waste plastics into filament. Create your own custom filaments with unlimited physical properties. Built, inspected, and tested by our technicians at our Vermont facility in the United States. **Voltage Note – be sure to select the 110VAC (Domestic) or 220VAC (International) specific to the country that you are going to...
$1,200.00
**8 Week Lead Time** The Filabot Spooler is the ultimate complement to our...
**8 Week Lead Time** The Filabot Spooler is the ultimate complement to our extruder systems. In addition to conveniently spooling your extruded filament, this unit allows you to easily fine-tune the extrusion diameter for the tightest possible tolerances. This is achieved through adjusting the speed of the puller wheels, which draw the filament from the extruder. The puller wheels have been engineered to be non-compressive, meaning they preserve the quality of the extrusion. This updated model features a variable traverse mechanism to evenly distribute filament onto the spool, an upgraded circuit board for the smoothest possible power delivery, and stainless roller shafts which glide...
$2,499.00
The Filabot EX2 system is our most advanced filament extruder. The EX2 features...
The Filabot EX2 system is our most advanced filament extruder. The EX2 features a three-stage extrusion screw made from hardened and polished high-carbon steel. This proprietary, patent-pending screw is designed to pressurize plastics during the extrusion process, assisting in diameter control and boosting the overall output. The mixing capability of the screw is enhanced by the utilization of a progressive compression section, which applies shear force between the polymer and the barrel wall. The EX2 also features extrusion speed control, which is exclusive to this model. The speed control board includes an automatic, variable voltage control module that is engineered...
From $15.61
This new 3D850 PLA has been engineered by Natureworks specifically for 3D printing....
This new 3D850 PLA has been engineered by Natureworks specifically for 3D printing. This formula crystallizes faster that their other PLA compounds, which allows for accelerated printing speeds with less distortion. This formula also features increased heat resistance for 3D prints.  The clarity of 3D850 is excellent, as it does not exhibit the yellowed undertone of other PLA compounds. This makes it ideal for use in creating transparent and translucent filaments.  3D850 has all the great hallmarks of PLA, as it does not require a heated bed for printing, is made from renewable sources, and is non-toxic. 3D850 PLA is produced...
$6,200.00
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic...
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic processing unit that granulates plastics down to a particle size that the Filabot can extrude. This unit stands 51" tall and has a 13.5" X 6.3" feed throat. It is powerful enough to effortlessly recycle failed 3D prints at 100% infill as well as other plastic material, allowing your organization to recover these resources for conversion into 3D filament. The unit processes material at a rate of up to 170 lbs/hr and operates at a low RPM, preventing thermal degradation of the regrind. Full technical support from Filabot is available.  Features Recycle...
$3,250.00
4 Week Lead Time - Build to Order Our filament tester is used...
4 Week Lead Time - Build to Order Our filament tester is used to check the consistency of extruded filament. Simple place a spool of filament on side then feed through the drive system to the empty spool on the opposite side. As the filament comes off the spool is passes through a laser system that measures the diameter and records to our custom software. You will visually be able to see the diameter of every section of filament and know with confidence if the filament is good for printing with.  Features High Accuracy Laser Touch Screen Graph Traverse System...
$58.17
Use the Filabot Melt Filter Nozzle to help decontaminate your recycled materials for...
Use the Filabot Melt Filter Nozzle to help decontaminate your recycled materials for a clean, consistent filament. This nozzle includes a stainless steel mesh screen to filter small contaminates that have slipped through the cleaning and grinding process. By filtering out these small contaminates, the chances of clogging the printer nozzle will decrease immensely. We offer these nozzles in both previous and current style extruder nozzles and it works with all diameters. B for previous style extruders and F for current style extruders. We recommend using a filter with a mesh opening size 75% or less of the 3D printer...

1 – 9 products of 9