Special Offer for Colleges and Universities!

We’re offering a 10% discount to faculty and students at colleges and universities! To get 10% off verify your status at checkout. The discount applies to all products at Filabot. Companies that Use Filabot

$6,200.00
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic...
For international shipping please email us at Contact@filabot.com The Filabot Industrial Reclaimer is a commercial-quality plastic processing unit that granulates plastics down to a particle size that the Filabot can extrude. This unit stands 51" tall and has a 13.5" X 6.3" feed throat. It is powerful enough to effortlessly recycle failed 3D prints at 100% infill as well as other plastic material, allowing your organization to recover these resources for conversion into 3D filament. The unit processes material at a rate of up to 170 lbs/hr and operates at a low RPM, preventing thermal degradation of the regrind. Full technical support from Filabot is available.  Features Recycle...
$3,250.00
4 Week Lead Time - Build to Order Our filament tester is used...
4 Week Lead Time - Build to Order Our filament tester is used to check the consistency of extruded filament. Simple place a spool of filament on side then feed through the drive system to the empty spool on the opposite side. As the filament comes off the spool is passes through a laser system that measures the diameter and records to our custom software. You will visually be able to see the diameter of every section of filament and know with confidence if the filament is good for printing with.  Features High Accuracy Laser Touch Screen Graph Traverse System...
$2,499.00
The Filabot EX2 system is our most advanced filament extruder. The EX2 features...
The Filabot EX2 system is our most advanced filament extruder. The EX2 features a three-stage extrusion screw made from hardened and polished high-carbon steel. This proprietary, patent-pending screw is designed to pressurize plastics during the extrusion process, assisting in diameter control and boosting the overall output. The mixing capability of the screw is enhanced by the utilization of a progressive compression section, which applies shear force between the polymer and the barrel wall. The EX2 also features extrusion speed control, which is exclusive to this model. The speed control board includes an automatic, variable voltage control module that is engineered...
$1,399.00
The Filabot Original is designed and engineered to bring industrial filament production quality...
The Filabot Original is designed and engineered to bring industrial filament production quality right to your desktop. In fact, you’ll enjoy savings of up to 90% over commercially purchased filament when you produce your own filament using inexpensive, raw plastic pellets. Save even more by turning failed prints and household waste plastics into filament. Create your own custom filaments with unlimited physical properties. Built, inspected, and tested by our technicians at our Vermont facility in the United States. **Voltage Note – be sure to select the 110VAC (Domestic) or 220VAC (International) specific to the country that you are going to...
$1,200.00
**8 Week Lead Time** The Filabot Spooler is the ultimate complement to our...
**8 Week Lead Time** The Filabot Spooler is the ultimate complement to our extruder systems. In addition to conveniently spooling your extruded filament, this unit allows you to easily fine-tune the extrusion diameter for the tightest possible tolerances. This is achieved through adjusting the speed of the puller wheels, which draw the filament from the extruder. The puller wheels have been engineered to be non-compressive, meaning they preserve the quality of the extrusion. This updated model features a variable traverse mechanism to evenly distribute filament onto the spool, an upgraded circuit board for the smoothest possible power delivery, and stainless roller shafts which glide...
From $180.00
Filabot provides a testing service in a few different levels. More detailed descriptions...
Filabot provides a testing service in a few different levels. More detailed descriptions are outlined below. Cost is for one polymer to be tested. Regardless of a pass or fail, testing services are not refundable.  Pellet Extruding Test - $180.00 We test pellets provided by the customer to see if the plastic can be extruding using our Filabot extruder systems. We will provide documentation on the proper temperatures and set up procedures. Minimum of 1lb of material needed for testing, also an MSDS on the material is needed. Customer mails the sample to our testing lab after placing an order. Solid...
From $114.14
With 16 MILLION colors, we now have the color that you need, as...
With 16 MILLION colors, we now have the color that you need, as well as more colors than anyone, ever. No longer are you stuck with using filaments that are standard colors, or colors that are just "close enough". Pick the best colors that will match your school or company colors. All of our filament is laser measured to be within a +/-0.05mm tolerance or your money back! All filament is made to order with a 3 week lead time Laser measured, +/- 0.05mm tolerance RGB color code system 16 Million Colors
$58.17
Use the Filabot Melt Filter Nozzle to help decontaminate your recycled materials for...
Use the Filabot Melt Filter Nozzle to help decontaminate your recycled materials for a clean, consistent filament. This nozzle includes a stainless steel mesh screen to filter small contaminates that have slipped through the cleaning and grinding process. By filtering out these small contaminates, the chances of clogging the printer nozzle will decrease immensely. We offer these nozzles in both previous and current style extruder nozzles and it works with all diameters. B for previous style extruders and F for current style extruders. We recommend using a filter with a mesh opening size 75% or less of the 3D printer...
$58.17
Use the Filabot Melt Filter Nozzle to help decontaminate your recycled materials for...
Use the Filabot Melt Filter Nozzle to help decontaminate your recycled materials for a clean, consistent filament. This nozzle includes a stainless steel mesh screen to filter small contaminates that have slipped through the cleaning and grinding process. By filtering out these small contaminates, the chances of clogging the printer nozzle will decrease immensely. We offer these nozzles in both previous and current style extruder nozzles and it works with all diameters. B for previous style extruders and F for current style extruders. We recommend using a filter with a mesh opening size 75% or less of the 3D printer...
From $56.40
(FAA Certified) Flame Retardant ABS is a specially formulated plastic that when removed from a flame...
(FAA Certified) Flame Retardant ABS is a specially formulated plastic that when removed from a flame source, the component extinguishes itself. This filament is ideal for applications where the component could be exposed to flame or ignition from a spark.  Appearance and properties similar to standard ABS Product is approximately 90% ABS, and 10% flame retardant additives Product is flame retardant and will extinguish once flame source is removed  Flammability V-0 @ 1/16 in V-0 @ 1.5 mm UL94 Flammability 5VA @ 1/8 in 5VA @ 3.0 mm UL94 FAR 25.853 Certification; FTG ABSFR material complies with FAA safety standards under (FAR 25.853, Appendix F, Part I,...
$56.10
Filaflex is an elastic filament for 3D Printing. This material allows you to...
Filaflex is an elastic filament for 3D Printing. This material allows you to create elastic type parts on your 3D printer. Filaflex provides a new world of possibilities, allows you to combine rigid material such as ABS or PLA with a double extrusion head printer. Almost any printer is compatible. Specifications: Print Temperature: 220ºC - 230ºC Print Without Hot Bed, and Without Kapton Resistant to Acetone, Fuel, and Other Solvents Spool Sizes: 1/2lb or 1lb Helpful Links: Material Safety Datasheet: Filaflex
$52.12
These filament spools are our standard spools. We typically spools .5kg of material...
These filament spools are our standard spools. We typically spools .5kg of material onto this spools. This spool works with all of our Filabot Spooler systems. Spool Dimensions: 8in x 2 1/4in There are 10 spools per case
$34.60
This new coating offers a professional quality coating finish for any type of...
This new coating offers a professional quality coating finish for any type of 3D printed part. This coating is simpler to use compared to other coatings as it has a one to one mixtures ratio, and a application specific properties to ensure that no bubbles are induced when coating objects. Use this product to protect your 3D prints, make them stronger, and to save time on finishing. Item has 16oz of coating epoxy for coating many parts.  What's in the box: 8oz Part A 8oz Part B 3 Foam Brushes 3 Mixing Cups 3 Mixing Sticks Instructions Additional Information: Material Safety Datasheet: PC9903A...
From $30.80
PETG+ (polyethylene terephthalate glycol-modified) plastic is a high performance polymer that has excellent...
PETG+ (polyethylene terephthalate glycol-modified) plastic is a high performance polymer that has excellent chemical resistance, superior optical clarity, and significant flame retardancy. It is the first release in the Filabot Technical Grade line of materials (FTG) which are available in both pellet and filament form. Filabot Technical Grade PETG+ pellets are formulated for performance in filament extruders, providing high quality diameter control and an aggressive extrusion speed. The higher melt flow of PETG+ permits higher speed 3D printing, similar to that of PLA. PETG+ exhibits excellent impact strength, which makes it ideal for printing components that need to absorb impact shock without fracture. Filabot is committed to...
From $28.12
Click here to read our review of this product.  Value Pack - Comes with 5...
Click here to read our review of this product.  Value Pack - Comes with 5 mixing cups, 5 brushes, and 5 mixing sticks Standard - Comes with 1 mixing cup, 1 brush, 1 mixing stick XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors...

1 – 15 products of 43