Value Pack - Comes with 5 mixing cups, 5 brushes, and 5 mixing sticks
Standard - Comes with 1 mixing cup, 1 brush, 1 mixing stick
XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.
Inexpensive to Use: 1 oz covers 100+ square inches.
90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.
Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
XTC-3D® does not contain VOC's, phthalates or phosphates.
This is a before and after shots that show how the coating works. The green part is the finished part that was painted.
When used on any of the Taulman 3D t-glase filaments the 3D prints come out almost clear as glass.
XTC used on top of print, untouched on bottom. (Photo by Taulman)
Technical Bulletin: Click Here
MSDS: Click Here